在人們開始關注不同行業的相關信息時，每個行業的特殊點開始得到人們的關注，比如道路施工方面，冷再生機是一種非常好的舊瀝青路面改造機器。舊瀝青路面改造機器冷再生機如何？冷再生機出租廠家為您講解。

When people began to pay attention to the relevant information of different industries, the special points of each industry began to get people's attention. For example, in road construction, the cold recycling machine is a very good old asphalt pavement reconstruction machine. How about cold recycling machine for old asphalt pavement reconstruction? The cold regeneration machine rental manufacturer will explain it to you.

1、瀝青路面就地冷再生并不是人們通常所理解的將已破損的瀝青路面重新恢復到完好的原始狀態，而是將舊面層和部分基層一并打碎混合之后就地改建成新的基層(或底基層)。嚴格地講，此工藝應該稱之為舊瀝青路面材料的就地再利用。

1. Cold in place recycling of asphalt pavement is not generally understood to restore the damaged asphalt pavement to its original state, but to smash and mix the old surface course and part of the base course together and then rebuild them into a new base course (or subbase). Strictly speaking, this process should be called the in-situ reuse of old asphalt pavement materials.

路面就地冷再生的工作原理，是在原有舊路鋪層的基礎上，按照新的設計要求，選擇性地摻入適量的骨料、水泥、石灰、粉煤灰、乳化瀝青、泡沫瀝青和水等外加材料，利用就地冷再生設備，實際上就是一臺大型的穩定土路拌機),。

The working principle of in situ cold recycling of pavement is to selectively add appropriate amount of aggregate, cement, lime, fly ash, emulsified asphalt, foam asphalt, water and other external materials based on the original old pavement according to the new design requirements. In fact, the in situ cold recycling equipment is a large stabilized soil road mixer,.

在自然常溫下，就地連續完成對舊鋪層(路面和部分基層)的銑刨、破碎、添加料、拌和、攤鋪等工序，隨后進行找平和碾壓，修建出一種特殊級配的道路基層(或底基層)。

Under natural normal temperature, the milling, crushing, adding, mixing, paving and other processes of the old pavement (pavement and part of the base course) are continuously completed on the spot, followed by leveling and rolling to build a special graded road base (or subbase).

2、就地冷再生機適用范圍廣，施工優勢明顯，由于就地冷再生施工是將原道路的面層和基層變成了新的道路基層(或底基層)，致使新道路的面層少要在此標高的基礎上開始鋪筑。

2. The on-site cold recycling machine has a wide scope of application and obvious construction advantages. Because the on-site cold recycling construction is to change the surface course and base course of the original road into a new road base (or subbase), the surface course of the new road must be paved at least on the basis of this elevation.

況且在高標準的道路改造中，有時是將再生層作為底基層，在此基礎上還要加鋪二灰碎石等基層材料，這就使得改造之后的路面標高遠遠大于原來路面的標高，沿路構造物處路面的設計結構將隨之發生變化。

Moreover, in the reconstruction of high standard roads, sometimes the recycled layer is used as the subbase, and on this basis, lime fly ash macadam and other base materials are also paved, which makes the pavement elevation after reconstruction much higher than the original pavement elevation, and the design structure of the pavement along the road structures will change accordingly.

如果在城市道路中采用此法施工，原有的排水系統也將隨之受到一些影響。因此，對于路面標高有較嚴格限制的道路，不宜采用此法施工。

If this method is used in urban road construction, the original drainage system will also be affected. Therefore, this method should not be used for roads with strict limitation on pavement elevation.

針對舊瀝青路面改造機器冷再生機如何的這個問題我們從以上兩方面認識到了，您對此有什么相關事項咨詢就來我們網站http://ispycorp.com看看吧！

We have learned from the above two aspects about the problem of cold recycling machine for old asphalt pavement reconstruction. If you have any questions about this, please come to our website http://ispycorp.com Look!