當我們不用壓路機時，保養就顯得尤為重要，長期不適用的時存放也是需要格外關注的，下面就由冷再生機租賃人員為您講解一番吧。

When we don't use the roller, maintenance is particularly important. When it is not applicable for a long time, storage also needs special attention. Let's explain it to you by the rental personnel of the cold recycling machine.

所處的環境盡量避免潮濕，并且在地面上鋪上木板，避免在不干燥的環境中。在比如：停放后還要在設備上蓋好罩布，以免有灰塵進入到設備中。

The environment shall be kept away from humidity as far as possible, and wooden boards shall be laid on the ground to avoid being in a non dry environment. For example, after parking, cover the equipment with a cloth to prevent dust from entering the equipment.

當然，對于租賃的壓路機在存放之前之前，要行保養，把設備清理干凈，如果有損壞的幾件我們要進行修復，隨時讓設備處于好的情況。對于設備的發動機，要把里面的冷卻水給放干凈，發動機機油也要及時的更換掉。要知道，燃油機是需要加油的，不然會容易生銹。

Of course, before storing the leased roller, we should first maintain and clean the equipment. If there are damaged parts, we should repair them to keep the equipment in good condition at any time. For the engine of the equipment, the cooling water inside should be drained and the engine oil should be replaced in time. You know, the fuel engine needs to be refueled, otherwise it will rust easily.

設備打算長期不用的時候，我們也要定期的啟動發動機，這樣才能夠防止設備生銹。當然在啟動前要把冷卻水注滿，在存放前要再次放掉。對于蓄電池的保管也是很重要的，要把蓄電池拆下來防止干燥的環境中。

When the equipment is not intended to be used for a long time, we should also start the engine regularly, so as to prevent the equipment from rusting. Of course, the cooling water should be filled up before startup and drained again before storage. It is also very important for the storage of the battery. It is necessary to remove the battery to prevent it from being in a dry environment.

記住，我們須要注意的是，不能再壓路機蓄電池上面放置導電的物體，在拆卸時，也要注意把電源關掉，避免意外事故的發生。設備的防銹處理是很關鍵的，在存放前可以先把整機進行重新的噴漆，有金屬裸露的地方更是需要防銹的。

Remember, what we need to pay attention to is that we can't put conductive objects on the roller's battery. When disassembling, we should also pay attention to turning off the power to avoid accidents. The anti rust treatment of the equipment is very important. Before storage, the whole machine can be repainted, and the exposed metal parts need anti rust.

想要了解更多關于這方面的知識，歡迎咨詢正規公司，同時也希望您能給我們提供寶貴的意見和建議，關注我們http://ispycorp.com，了解更多！

If you want to know more about this, you are welcome to consult regular companies. At the same time, we hope you can give us valuable opinions and suggestions, and pay attention to us http://ispycorp.com Yes, learn more!