小型壓路機在操作方面要嚴格按照說明書來，由于小視頻視覺的沖擊，現在我們很少看文字的東西，但是切不可疏忽。你認為對的的操作方法，可能在使用一段時間之后會適得其反。接下來將幾條比較關鍵的施工操作要點：

Small road rollers should be operated in strict accordance with the instructions. Due to the visual impact of small videos, we seldom read words, but we must not neglect them. The operation method you think is right may backfire after being used for a period of time. Next, several key construction operation points will be introduced:

1，操作小型壓路機寸要一直坐在操作椅上。

1. Always sit on the operating chair when operating a small roller.

2，冷再生機租賃廠家認為當在不平整路面，斜坡，柔軟或者粗糙的材料上操作時要保持警惕。機器可能會發生意外移動或滑行。

2. The rental manufacturer of cold recycling machine believes that it is necessary to be vigilant when operating on uneven roads, slopes, soft or rough materials. The machine may move or slide unexpectedly.

3，在煤礦，溝渠或者站臺邊緣工作時要小心，檢查確保路面足夠穩定可以承載機器和操作人員的重量，不會出現輪子的滑行，墜落或者傾斜。

3. Be careful when working at the edge of coal mines, ditches or platforms, and check to ensure that the road surface is stable enough to carry the weight of machines and operators, and there will be no wheel sliding, falling or tilting.

4，操作小型壓路機要穿適合工作地點的防護衣服。保證手，腳和寬松衣服遠離正在運行的設備零件。

4. Wear protective clothing suitable for the working place when operating a small roller. Keep hands, feet and loose clothes away from running equipment parts.

5，禁止發動機丁作中或者機器剛關閉后立即觸摸發動機或者消音器，這些區域此時很熱可能會導致灼傷。

5. It is forbidden to touch the engine or muffler immediately after the engine is working or the machine has just been shut down. These areas are very hot at this time, which may cause burns.

6，禁止在燃料蓋松開或缺失的情況下操作機器。

6. It is forbidden to operate the machine when the fuel cap is loose or missing.

7，禁止在機器運轉時擅離職守。

7. It is forbidden to leave without permission when the machine is running.

8，使用防護裝置丼且按照工作順序操作小型壓路機，禁止任何未經培訓的人員操作機器，操作者應該熟悉或者了解本設備相關潛在的危險。所以如果您有什么不明白的地方隨時來咨詢我們http://ispycorp.com吧。

8. Use the protective device well and operate the small roller according to the working sequence. It is forbidden for any untrained personnel to operate the machine. The operator should be familiar with or understand the potential hazards related to this equipment. So if you don't understand anything, please feel free to consult us http://ispycorp.com OK.